SMW-AUTOBLOK - Каталог кулачков - 2009 EN
для размещения заказа - smwautoblok@smwautoblok.ru
The economical solution:
Roughing jaws with exchangeable grippers:
s Made from standard SMW-AUTOBLOK jaws. Features:
s Economical, because only the worn out gripper is s Safe gripping of rough material/forgings/castings
changed in seconds. made from standard or high tensile strength material.
s Extended life compared to standard roughing jaws. s Increased gripping allows heavier cuts.
s Fast change of worn out grippers.
UGE 30 Id.-No. 089822, Solid Carbide Gripper for prism jaws and fixtures (patented): s T-nuts
s For external and internal gripping of rectangular parts s grippers
Parts included: Gripper with Torx screw s For chuck jaws, fixture jaws and fixtures
s Front mounting of bolt
Mounting instruction s Gripper seat: drilling and tapping can easily be done.
1. Drilling 12.7 bottom of seat 120° or flat
2. Tapping of thread Bottom of seat can be either 120° (standard drill tool)
or flat
prism jaws s For high production hardening of gripper pocket
recommended
MGH, HSS hardened s Torx screw driver Id. No. 085961
s Torx-screw M4 x 13,5 Id.-No. 033010
vice optional
Clamping points for jaws
s For external and internal gripping
s Increasing gripping allows for heavier cuts
s Rear mounting of bolts
s Point seat can easily be machined: drilling only
Parts included: Hardened point without screw
Mounting instruction: soft jaws D +0,05
0
Type MGH 6 MGH 8 MGH 10 MGH 12 hard jaws D +0,07
087805 081852 081853 0,02
Id.-No. 081851 8 10 12
12 14 16
D mm 6 M4 M5 M6 *T±0,1
8 10 11
L mm 10 4.5 5.5 6.6
9 9 11
G mm M3 8.5 9.5 10.5 B
0.5 0.5 0.5 A
A mm 6 M5 x 14 M6 x 16 C
B mm 3.4 R max.
C mm 9
T mm 7.5
R mm 0.3 *equal per seth
within 0,1 mm
screw DIN 912M3 x 14 M4 x 14
smwautoblok@smwautoblok.ru SMW-AUTOBLOK 67
www.smwautoblok.ru