SMW-AUTOBLOK - Каталог кулачков - 2009 EN
для размещения заказа - smwautoblok@smwautoblok.ru
Precision gripper inserts
G14 und G25 with pull down
G14 + G25 Controlled penetration t G-gripper characteristics
of the grip tooth
Stop surface s Type G grippers have a stop surface for a controlled
penetration of the grip tooth
G14 (light duty version)
s The workpiece is clamped concentric on the stop
material: HSS surface, so that the clamping dia. and the machining
dia. are concentric
s The high precision of the gripper guarantees
concentricity even after replacing worn out grippers
s Highest torque transmission is guaranteed with the
combination of friction and positive drive
s The geometry of the gripper creates a pull down
effect on the workpiece
s TIN coated high speed steel for long life
s You can select the corresponding gripper for all
applications according to the grindstock allowance
s Gripper with controlled penetration 0.070–0.30 mm
are standard
s Special grippers are available on request
Mounting dimension
19.3 14 Dimension to be within + 0,01
tt to tongue and groove/fine serration
s T-nuts
s grippers
G14 Measured into sharp corner Gripper G14
fitted without clearance
12 6
carbide milling tool
SMW-AUTOBLOK Type G14-070 G14-100 G14-125 G14-150 G14-175 G14-200 Id.-No. 139528
Controlled penetration t 0.07 0.10 0.125 0.15 0.175 0.20
Id.-No. 235617 235619 85
235615 235616 235618 235620 12 16
11 15,6
G25 (heavy duty version) Mounting dimension
material: HSS Dimension to be within + 0,01
to tongue and groove/fine serration
15.8 Measured into sharp corner Gripper G25
fitted without clearance
10
carbide milling tool
SMW-AUTOBLOK Type G25-100 G25-150 G25-200 G25-250 G25-300 Id.-No. 139540
Controlled penetration t 0.10 0.15 0.20 0.25 0.30
Id.-No. 85
232704 231275 231276 231277 231278
SMW-AUTOBLOK 69
smwautoblok@smwautoblok.ru
www.smwautoblok.ru