SMW-AUTOBLOK - Полный каталог оснастки - 2010 EN
для размещения заказа - smwautoblok@smwautoblok.ru
KNCS®-N
Main dimensions and technical data QUICK JAW CHANGE
For highest speeds: at gripping force curve
325-104 FG 400-128
500-155
340-117 630-165
F
260-78
FG Total gripping force at 3 jaws (kN)
FG Total gripping force at 3 jaws (kN)275-86210-52
225-66
170-43 FG 3
F
140-35
Speed (r.p.m.) Speed (r.p.m.)
The data in the diagrams refer to 3-jaw-chucks, newly maintained according to their Safety advice/danger of damage:
service manuals using SMW-AUTOBLOK K05 grease.The static and dynamic gripping When using taller/heavier jaws and/or clamping on a bigger
forces have been measured using standard soft top jaws, placed in a position not diameter reduce draw pull/rotating speed accordingly.
exceeding the outer diameter of the chuck.
Type KNCS-N 325-104 340-117 400-128 500-155 630-165
Mounting
Dim. Z220 Z300 A8 A11 Z300 A8 A11 Z300 Z380 A11 A15 Z380 A11 A15 Z380 A15
A 324 340 400 500 630
B 130 130 149 151
C 139.2 139.2 158.2 160.2 130 160 151 140 140 161 163 174 195 197 174 197
D 220 300 139.73 196.88
E 139.3 169.3 160.4 149.2 149.2 170.2 172.2 184 205 207 184 207
F 268
H6 G1 144 300 139.73 196.88 300 380 196.88 285.77 380 196.88 285.77 380 285.77
G2 M115 x 2/22
K M132 x 2/25 270 330 420 585
L 25/28
M 28 28 47 49 160 180 207 217
N 104
Rotating ring nut/depth O 171.4 235 171.4 235 M125 x 2/22 M138 x 2/22 M165 x 2/25 M175 x 2/25
Piston thread/depth P M16 M20 M16 M20
Piston stroke Q 130 M146 x 2/25 M160 x 2/25 M185 x 2/28 M195 x 2/28
R1 385
max. R2 M10/16 25/28 32 42 42
S M10/16
Fixing bolt circle a 6 28 58 49 32 32 53 55 42 63 65 42 65
Fixing bolt b 32
c 12 117 128 155 165
d 115
f 36 235 171.4 235 235 330.2 235 330.2 330.2 235 330.2 330.2 330.2
g 20
k 40 M20 M16 M20 M20 M24 M20 M24 M24 M20 M24 M24
l M12/17
m 9.3 140 152 180 195
n 3
o 6 400 452 552 643
p 155.7/106.2
Thread/Thread depth - 111.7/62.2 M10/16 M12/18 M16/25 M16/25
Thread/Thread depth r 5.5
teeth 49.5 M10/16 M12/18 M12/18 M12/18
_° 9
`° 60 6 8 88
60
32 32 45 45
f7 12 12 18 18
115 125 160 200
36 43 50 50
H7 20 26 30 30
40 54 60 60
Thread/Thread depth M12/17 M12/17 M16/34 M16/34
9.3 9.3 10 10
3 3 44
6 7 99
max./min. 163.2/113.7 182.3/121.8 225/141 270.5/179.5
max./min.
Base jaw tooth pitch 119.2/69.7 143.3/82.2 164/80 170.5/79.5
Base jaw offset
Base jaw offset 5.5 5.5 7 7
49.5 60.5 84 91
9 11 12 13
60/35 60 60 20/9 x 40
60 60 60 60
Stroke per jaw at mm 7.0 7.0 25 10.0 10.0
mm 8.0 8.0 32 42 42
piston stroke K 25
Stroke per jaw at kN 8.0 28 120 120
piston stroke K max. 28
max. actuating force
95 95 115
3-jaw chuck
max. total gripping force kN 180 180 240 250 250
3-jaw chuck r.p.m. 4000 3500 3500 2200 1700
max. speed
kg 65 65 68 68 77 88.5 82.5 111 111 116 116 225 231 231 390 398
3-jaw chuck 1.24 2.5 6.5 18
Mass without top jaws kg·m2 1.2
Moment of inertia
Rec. closed center cyl. Type SIN-S 150/175/200 SIN-S 150/175/200 SIN-S 175/200 SIN-S 175/200 SIN-S 175/200
Rec. open center cyl. Type VNK 250-110 VNK 320-127 VNK 320-127 VSG 450-165 VSG 450-165
SMW-AUTOBLOK 81
smwautoblok@smwautoblok.ru www.smwautoblok.ru